Manual Fuel Transfer for Oil Petrol Water Liquid Water 1m

Description: Durable:The hose is Made of 2mm thickness PVC, tube length can be freely cut as needed,flexible corrosion resistant and clear, you can easily see the liquid flow.Function:With oil suction pump, you can make a small oil change, transfer petrol into a canister or refill the tank.Double Check Valve Design:Oil resistant rubber sphere, anti slip and anti used for petrol petrol oil water and other common liquids, also can be a water changer for aquariumEasy to use:Just insert the oil inlet pipe into the bottom of the fuel tank, and insert the oil discharge pipe into the prepared fuel tank, press the rubber ball 5-10 times and the liquid automatically flows out.Faster Flow Rate:Good operation,5s quick oil output, easy to use and carry.A variety of models are applicable, trucks, cars, motorcycles and other models can be used. Specification: Material: PVC+ Rubber+ MetalPipe Thickness:2mm/0.08inchPipe Outer Diameter: 18mm/0.71inchFor Transfer of Liquids as Gasoline, , Oil, Water etc.Hose length: 1m/1.5m/2m/3m (Optional) Package Includes: 1 Piece Suction ball1 Piece Hose2 Pieces Valve Clips Note: According to the arrow, identify the inlet and outlet pipes. Disconnect the oil pipe.Insert the oil inlet hose into the fuel tank and touch the bottom of the fuel tank.Insert the oil line into the prepared oil barrel.Squeeze the rubber ball 5–10times.Then the liquid automatically flows off.Note:This hand pump is suitable for the fuel tank that does not contain a theft proof oil filter.The height of the oil inlet is higher than the height of the oil outlet.Clean it soon after use to avoid clogging the oil pipe. Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....