KEO RTV SILICONE CHỊU NHIỆT CHUYÊN DÙNG LÀM GIOĂNG MÁY LÀM RON ABRO 999 GASKET MAKER 85G (MÀU XÁM)
KEO RTV SILICONE CHỊU NHIỆT CHUYÊN DÙNG LÀM GIOĂNG MÁY LÀM RON ABRO 999 GASKET MAKER 85G (MÀU XÁM)
1 / 1

KEO RTV SILICONE CHỊU NHIỆT CHUYÊN DÙNG LÀM GIOĂNG MÁY LÀM RON ABRO 999 GASKET MAKER 85G (MÀU XÁM)

4.8
5 đánh giá
15 đã bán

Keo RTV silicone chịu nhiệt chuyên dùng làm gioăng máy làm ron ABRO 999 Gasket Maker 85g (màu xám) ABR 999 Gasket Maker is specialty formulated for import engines but may also be used on U.S. engines. Ideal gasket replacement for cam or transmission covers, thermostat

89.000
Share:
Duc Thanh Auto

Duc Thanh Auto

@duc-thanh-auto
4.5/5

Đánh giá

249

Theo Dõi

2.854

Nhận xét

Keo RTV silicone chịu nhiệt chuyên dùng làm gioăng máy làm ron ABRO 999 Gasket Maker 85g (màu xám) ABR 999 Gasket Maker is specialty formulated for import engines but may also be used on U.S. engines. Ideal gasket replacement for cam or transmission covers, thermostat housings, intake manifold seals, oil pans and water pumps. SKU 9-AB Grey 999 RTV Silicone Gasket Maker • Oxygen Sensor Safe • Neutral Cure, Low Odor • Effective Up to 650°F (343°C) • Designed Specifically for Import Engines 3 OZ/85g 12/CASE ABR 999 Gasket Maker is specialty formulated for import engines but may also be used on U.S. engines. Ideal gasket replacement for cam or transmission covers, thermostat housings, intake manifold seals, oil pans and water pumps. Resists most automotive fluids (except Petrol). DIRECTIONS: 1. Mating surfaces should be free of dirt, grease and oil. Remove old gasket material. Use care not to scratch softer metals. 2.Remove cap, puncture inner seal, screw on nozzle and cut to desired size. 3. Apply uniform, unbroken 1/16" to 1/8" (1.5mm to 3mm) bead around perimeter of one surface only (preferably the cover side). Completely surround all bolt holes . REPLACE CAP AFTER USE. 4. Wait 10 minutes for silicone to "skin over. Press parts together. Tighten all retaining bolts to manufacturer's specified torque. Remove any excess gasket maker with a dry towel. NOTE: Not recommended for head gaskets. Cure time for metal-to-metal joints is 1 hour. Allow 24 hours to fully cure for 1/8"(3mm) gaps. CAUTION: Uncured sealant causes Irritation. Avoid contact with eyes and skin. For eye contact, flush with water. If Irritation persists, call a physician. KEEP OUT OF REACH OF CHILDREN. Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Thương Hiệu
abro

Thương hiệu

ABRO

Xuất xứ thương hiệu

Mỹ

Xuất xứ

Mỹ

Sản phẩm có được bảo hành không?

Không

Hiện tại sản phẩm không có voucher ưu đãi !!!

Sản Phẩm Tương Tự

Sản Phẩm Liên Quan